Remote ALBANO TX-MD2 COD.5

100% compatible

Remote ALBANO TX-MD2 COD.5

ALBANO TX-MD2 COD.5

compatible with

Remote HR KIT LIBERTY

HR KIT LIBERTY

Your remote control ALBANO TX-MD2 COD.5


remote control compatible with
HR KIT LIBERTY
Attention :  Please ensure you have the original remote control in working condition if you order this compatible model: programming will be done through self-learning.

Reference : : TXMD2

All information concerning your remote control ALBANO TX-MD2 COD.5 :
 Free postage order 2 remotes
14 days to change your mind
Free advice when buying and programming
Secure payment

 Secure payment

Cheaper and compatible remote
DOMO EXPRESS KIT01 MAX
DOMO EXPRESS KIT01 MAX
View this remote
Attention :
Please make sure you have the original remote control in operational condition if you order this compatible model: programming will be done by a teach-in method.
Brand ALBANO
Model TX-MD2 COD.5
Référence fournisseur TXMD2
Frequency 26.995 MHz
Number of buttons 2
Type of programming 12 Switch
Type of battery 12V(23A)
Dimensions 9 x 1 x 4 cm
Battery and instructions included Yes
This remote replaces IUPPITER 1-30875 , EXTEL 141-1, SCIAR 141-1, SAFARI 2, SOMFY 224-1, PROMATER 224-1, PROMATER 224-2, TAU 250TX02E, TAU 250TX04E, GENIUS 252, CASALI 252, POWERDOOR 252, GENIUS 254, CASALI 254, POWERDOOR 254, TAU 26TX2, TAU 26TX4, SEA 30.900 MHZ -2, SEA 30.900 MHZ -4, MULTICODE 3079 40.685MHZ, SEA 30900-1 OLD, SEA 30900-2 OLD, SAFARI 4, IUPPITER 4-30875 , SEIP 40-AM, SEA 40.685 MHZ -2, SEA 40.685 MHZ -4, SOMMER 4010, ALBANO 4096-TX1 COD.5

Please note: this remote comes in various frequencies. Remote controls with different frequencies are not compatible. The displayed model has a frequency of 26.995 MHz. To verify the frequency of your remote, please look at the last of the 4+1 numbers engraved on the back of the remote: the frequency 26.995 MHz corresponds to the number 5. Please contact us for any other frequencies!
This remote control has a row of 12 small internal programmable switches inside. If your remote control has a row of only 8 switches, then the model displayed here is not the right one. You will have to install a new radio receiver.