Remote PRASTEL MPSTF2E
Currently replaced
Your

PRASTEL MPSTF2E GARAGE REMOTE CONTROL


replaced by
KING-GATES KIT 220V - 2 MYO 4C (100% compatible)
Remote KING-GATES KIT 220V - 2 MYO 4C
100% compatible

Shipping

Free postage
order 2 remotes

Quantity :

Your remote control MPSTF2E has been added to your cart

useful equipment for your remote control


Reference : :

The advantages of Remote Control-Express :

  • Free support on +442033188218
  • 24 months warranty
  • Batteries and instructions included
  • Manual included in PDF format by email
  • Programming tutorial
All information concerning your replaced product (Remote control PRASTEL MPSTF2E) :
 Free postage order 2 remotes
14 days to change your mind
Free advice when buying and programming
Secure payment

 Secure payment

Cheaper and compatible remote
HR R433F4
HR R433F4

€26.90

View this remote
Attention :
Please make sure you have the original remote control in operational condition if you order this compatible model: programming will be done by a teach-in method.
Brand PRASTEL
Model MPSTF2E
Frequency 433.92 MHz
Number of buttons 2
Type of programming 10 Switch
Type of battery 12V(23A)
Dimensions 8 x 1 x 3 cm
Battery and instructions included Yes
This remote replaces SMD 26.995 MHZ 1K, SMD 26.995 MHZ 1K MINI, SMD 26.995 MHZ OLD, GIBIDI 26.995-2, GIBIDI 26.995-4 OLD, BOSCH 27.145 MHZ, SERVO-LIFT 27.195, WAYNE-DALTON 3BTM-A433, SERVO-LIFT 40.685, WECLA 40.685 MHZ 1K, WECLA 40.685 MHZ 2K OLD, DEA 433-1, DEA 433-2, WAYNE-DALTON 5BWS-B433, ALLDUCKS 6203 12 BIT, DUCATI 6203 BLUE ROLLING CODE, DUCATI 6203 GREY, DUCATI 6203 RED, WECLA 801016F, WECLA 801023F-27MHZ, WECLA 801023F-40MHZ, WECLA 806011, WECLA 807117D , WECLA 807117F, WECLA 807117F TX1, WECLA 807117F TX2, WECLA 808114, BERNAL B 260.254-N
Please note the following the 3 important points:

1- Confirm the colour of the casing of your remote control: it must be GREY. If it is green with yellow buttons, then the correct model is the one from Doitrand, which is not compatible.

2- Confirm that CASIT is not written on the casing. If it is, then the correct model is the one from CASIT, which is not compatible.

3-Finally, open your remote control and confirm that it contains small switches for programming. If it does not, then the correct model is the Prastel MPSTF2RE, which is not compatible.

Important: If you intend to use this remote control for an alarm, you will need the general alarm instruction manual and also the installer code in order to program the remote control.